^
Select Page
Ecoaxis

AxisLog Micro is a data logger hardware which connects to the equipment control system over Modbus.

PRODUCT

AxisLog-MI Hardware Data Logger

AxisLog-MI Hardware Data Logger

AxisLog Micro is a data logger hardware which connects to the equipment control system over Modbus. AxisLog-MI has a configurable baud rate (1200 to 115200) - pre-configured baud rate for OEMs. Other protocols such as MPI, PPI, DF1 using an external converter are supported.
Manufactured by: A.T.E. Enterprises Private Limited (Business unit: EcoAxis)

  • FEATURES
  • GET A QUOTE
More
      Hardware/OS 
  • Environmental specifications: temperature: 0 to 55ºC, humidity: up to 90 percent RH (non-condensing)
  • Label: coloured polycarbonate with power status LEDs
  • Enclosure: metal (extruded aluminium)
  • Hardware: external power supply 24 VDC @ 1A
  • Dimensions: 60 mm (W) x 62.8 mm (H) x 21.8 mm (D)
  •   Interfaces 
  • Other protocols such as MPI, PPI, DF1 using external converter
  • Configurable baud rate (1200 to 115200) - pre-configured baud rate for OEMs
  • Data acquisition from third party devices over Modbus RTU (master) as per Modbus Application Protocol V1.1b
  • Serial interface: RS232 port with external converter for RS485
  • GSM (GPRS) data transfer to remote server over FTP
  •   Data Acquisition and Storage 
  • Supported number of parameters: 75 parameters (in any combination of analog or digital)
  • Each analog/digital parameter is 32/16 bit
  • Data acquisition interval (configurable): 6 groups, each tag assigned to one group, can enable / disable group, interval range supported from 1-99,999 second
  • Storage device and capacity: non-volatile flash memory for file storage, 3 Megabytes capacity
  •   Other Details 
  • Configuration over the air (DOTA)
  • Configuration file to be downloaded from FTP server, configure, upload the file back to server
  • Through SMS commands: select configuration supported through SMS commands
  • Only 2 authorized OEM numbers can send commands
  • Status display (optional)
  • Following status can be viewed using Hyperterminal: system start time and current time, acquisition related status and errors, FTP related status and errors, modem-related status and error, tag data values,
  • Module date and time RTC synchronised with service provider
  • Single UART port used for data acquisition as well as status display,

I would like to receive information about A.T.E. and its products from time to time.Privacy Policy

WordPress Tabs Free Version
WordPress Video Lightbox
Contact Us

Contact Form